The filter acts as a sediment trap ensuring water remains within the channel for sufficient time to trap particles preventing high flow from forcing particles through the mesh. The outlet allows filtered water to flow at a rate of 5 m³/h – ideal for components that require a high flow rate.

Offtake MDPE/HDPE pipe by installing a ¾” Female Compression Fitting adaptor to the outlet of the filter. Take into account the direction of water flow indicated by the arrow on the outer sleeve as emitters should be installed upstream.

Install before a run of, sprinklers, micro emitters, drip line or soaker hose for a time and cost-saving solution that essentially pays for itself in the long run. The filter ensures micro emitters can continue to work at the optimum level preventing failures and the need to replace expensive components.

The filter traps tiny dirt and sediment particles too small to see yet can easily block the tiny outlets of emitters. Even the smallest gathering of particles can lead to dry spots and noticeable undernourishment of plants.

Suitable for both low and high-volume irrigation systems operating up to 6 Bar. Features a 40 mesh screen and internal mechanisms that ensure maximum water flow efficiency even at low pressures.

To maintain the built to last properties of this irrigation filter, ensure the filter is maintained and cleaned regularly. Easily dismantle by unscrewing the channel located at the bottom of the filter to access the mesh screen and wash the sediment out.