The Hunter Pro Spray 2" Pop Up Sprinkler Body is a reliable and long-lasting sprinkler body for use in domestic and residential applications. This particular model has a pop up height of 5cm.
For a low cost alternative complete with heavy-duty retraction spring for positive ri... See Full Description
The Hunter Pro Spray 2" Pop Up Sprinkler Body is a reliable and long-lasting sprinkler body for use in domestic and residential applications. This particular model has a pop up height of 5cm.
For a low cost alternative complete with heavy-duty retraction spring for positive riser retraction, the HydroSure Pro-S Spray Body is manufactured using the strongest built-to-last stainless steel mechanism.
Innovative Ribbed Body and Durable Cap
Exclusively designed Hunter cap that does not leak even when loosened a full 360-degree turn! In all irrigation systems, weather, foot traffic, cycle pressures and landscaping equipment can cause the spray cap to loosen. This innovative cap-to-body grip promises to remain watertight even during high-pressure surges.
Multi-Functional Co-Moulded Wiper Seal
The innovative pressure-activated seal prevents cap-to-body leaks reducing flow-by and operates at low pressures allowing more sprinkler heads to be installed in the same zone. Made from chlorine and chemical-resistant materials, the wiper seal prevents debris from entering the body when the riser retracts reducing the risk of riser stick-ups.
Durable, Built-To-Last Construction
Features a heavy-duty internal spring built for consistent riser retraction ensuring long-lasting performance for all applications.
Leading Brand Compatibility
For ultimate watering flexibility, Hunter Pro Sprays are compatible with Sprinkler Spray Nozzles (sold separately) from leading brands. Choose a nozzle with an arc and radius suited to your watering requirements.
Flush Cap
Arrives complete with a removable flush cap with a pull ring. At the point of installation and during system maintenance, switch the system on with the flush caps installed to flush out any debris that would otherwise clog the sprinkler's nozzles. Retain the flush caps for flushing at the start, during and at the end of the watering season.
Specifications
Application: Residential/Commercial
Operational pressure range: 1.0 to 7.0 bar (100 to 700kPa)
Pop Up Height: 5cm
Sprinkler Body Height: 10cm
Exposed Diameter: 5.7cm
Inlet size: 1/2" BSPF
Does not include Sprinkler Nozzle (Sold separately)
Pop Up Sprinkler Bodies Frequently Asked Questions
Why is Water Pooling Around the Sprinkler Site?
Underground systems require frequent flushing to prevent dirt from clogging the nozzle or damaging the seal. Flush the system and clean the rotors if necessary to remove any sitting sediment.
Any damage to the riser caused by a mower or footfall will cause mechanical malfunction and disfigured spray patterns. Check each nozzle and turret on top of your sprinklers to ensure they are intact.
The area around a sprinkler site may become boggy/waterlogged indicating a loose connection between the swing joint/fitting or a break in the pipe network. To repair a leak, use a Compression Joiner, Joiner depending on the pipe used or install PTFE Tape around any male threaded connection to ensure a watertight seal.
Water leaking from sprinkler sites even when the system is switched off indicates a problem called low head drainage. A pop-up sprinkler with a Check Valve will prevent water pooling from sprinklers installed at the lowest elevation.
My Sprinklers are not Working the Same as when Purchased!
Over time a sprinkler may experience a build-up of sediment and debris that blocks the nozzle outputs or damages the riser retraction mechanisms inside the sprinkler. Flush the system and clean out the rotor sprinkler as explained in our Sprinkler Maintenance Guide.
Prevent debris build-up by installing an Irrigation Filter at the start of the system. • Alternatively, leaking connections or a pipe supplying the sprinkler may have split. The water lost from connections that are not watertight will cause pressure loss and reduce performance.
Why are my Underground Pipe Connections Leaking?
An area that is boggy or waterlogged indicates a leaking connection or a pipe that may have split. Most connection points can be tightened by hand or by adding two wraps of PTFE Tape around male threads or replacing connectors that over time, have snapped.
When fixing your pipe network, depending on the pipe you are using to supply your system will indicate the type of connector you need to repair the damage.
My Sprinkler Does Not Cover the Range/Radius Outlined in the Specifications
A variation in flow rate or pressure drop from the water source will also reduce the performance of sprinklers – Check the flow rate from your tap remains high enough during the time of day your system is set to run using our Calculating Flow Rate from the Water Source Guide.
On windy days, the spray pattern from your sprinklers may alter even when using nozzles with built-in wind resistance. Alternatively, running a system at a bar pressure that is too high, will create misting – Consider installing a Pressure Reducer regulated as specified in the sprinkler specifications to minimise spray pattern wind drift.
