HydroSure Straight Compression Fitting - 32mm x 1" Male
A HydroSure 32mm x 1" Male Straight Compression Fitting, suitable for use with MDPE and HDPE irrigation pipe in an irrigation system.
A 32mm x 1" Compression fitting suitable for use with 32mm HDPE and MDPE irrigation pipe. The threaded end is a male connection, and the compression fitting itself features a thick O-ring to create a reliable, water-tight seal and a short 'pipe-guide' that pulls a few millimetres out of the fitting to allow for some wiggle to make it easier to push the pipe into the coupling.
These fittings are easy and fast to install, simply place the neck and o-ring over the pipe then push the pipe through the guide in the fitting. The pipe should be pushed roughly 2cm into the compression fitting, the pipe must be pushed past the first ring visible on the coupling to avoid the risk of it coming loose. Once the pipe is in as far as it will go, tighten the grip firmly to ensure a secure, leak-free connection.
Manufactured from polypropylene with additional specialized substances of high standards for ultimate durability and reliability. Designed and manufactured according to International Standards for all compression fittings.
- A = 81.5
- B = 60.5
- C = 63
- E = 33.5
- L = 17.5
|Fits Pipe Size||32mm|
|BSP Thread Size||1"|
|Connection Type||Compression : Threaded|
|Internal Diameter of Fitting||32mm|
|For Pipe Type||HDPE, MDPE|
|Delivery Time||Next Working Day|
- Plasson Silverline Compression - Male Adaptor - 32mm x 3/4" (14020E20)
- Plasson Silverline Compression - Male Adaptor - 32mm x 1" (14020E30)
- Plasson Mechanical Compression - Male Adaptor - 32mm x 3/4" (7020E20)
- Plasson Mechanical Compression - Male Adaptor - 32mm x 1" (7020E30)
- HydroSure Straight Compression Fitting - 32mm x 3/4" Male (HSMSC3234)