Product code
32912516

HydroSure Nut Lock Reducing Tee - 21mm to 14mm

31 In Stock
Divert LDPE or Drip Line three ways with minimal flow disruption. ... See Full Description
Now £1.28 £1.07
Save £0.15 Was: £1.43 £1.19
(Ex. VAT) (Inc. VAT)

Divert LDPE or Drip Line three ways with minimal flow disruption. The double connection promises a water-tight seal withstanding up to 6 bar.

Solutions that Work

For Top Tips on how to set up a garden watering system, read our Buyers Guide.



setupwithease

Set-up-with-ease

Nut Lock fittings are a fast and simple solution to use when building your above-ground irrigation system. Simply place the Nut Lock collar onto your pipe and firmly push the pipe over the barbed connection point creating your mechanical seal. Then slide the collar to the edge of the pipe and twist onto the thread pushing the pipe firmly down onto the barb. You can re-use your Nut Lock fittings on multiple occasions due to being able to remove the fittings from your irrigation pipe with ease and without the need of cutting your pipe or the use of tools.

Ultimate Durability

Nut Lock fittings are constructed from high-grade polypropylene with UV-resistant additives, engineered to be long-lasting and robust for ultimate reliability. Due to the size and robust material of the Nut Lock fitting, they are ideal for use in public areas as a quick and easy repair to a damaged pipe/irrigation system or for long-term use.

timesaving

Time-Saving

Nut Lock fittings do not require you to preheat the irrigation pipe prior to fitting, creating a fast and secure method for repairing damaged pipe in your irrigation system with the added benefit of a no-tools assembly in less than 30 seconds!


Irrigation Fittings Frequently Asked Questions

  • Why use a nut lock connector instead of a barbed fitting?

    Nut lock connectors arrive complete with a barbed inlet and a nut that compresses the pipe onto the barb promising an extra-secure connection and eliminating the risk of pipe dislocation. This extra level of protection means nut lock connectors can withstand pressures up to 6 bar.
  • My connector has a different size printed on the fitting – I have received the wrong product!

    The external diameter is printed on the surface of a nut lock fitting however, compatible Drip Line and LDPE Pipes are quoted by their internal diameter. For easy identification of the compatible pipe, you will see our nut lock connectors listed with their internal diameter because connectors push inside the pipe. As nut lock connections must be tight to ensure a secure, watertight seal, we advise heating the pipe in boiling water before installation to make insertion easier.
  • How do I connect LDPE/drip line to a garden hose pipe?

    The soft PVC structure of a garden hose is not compatible with nut lock fittings as these connectors require the rigid pipe structure of drip line or LDPE to lock onto. To connect drip line or LDPE pipe to a garden hose, remove the nut and tapper from any Nut Lock Connector and connect this to a female threaded Quick Click Tap Connector by simply threading them together. Connect the LDPE pipe or drip line to the nut lock outlet and install the Hose Pipe to the quick-click tap connector via a Hose End Connector. 

  • Can nut lock fittings be used with MDPE or HDPE pipes?

    No, nut lock fittings should only be used to connect lengths of LDPE, and Drip Line. The wall structure of Medium-Density and High-Density pipe requires fittings that fit the external diameter and should be installed alongside Compression Fittings.
  • Can nut lock fittings be buried underground as part of a sprinkler system?

    Yes, nut lock fittings are ideal for sub-surface installation up to 15cm and are capable of withstanding bar pressures required for a small domestic underground sprinkler irrigation system.
Product Specification
Product Code32912516
EAN5055936486225
MaterialPlastic
Fits Pipe Size21mm
ColourBlack
Connection TypeNut Lock
Price Per Unit (Inc. VAT)1.43

Customers who bought this item also bought