Ideal for use in micro-irrigation/emitter systems or domestic underground pop-up sprinkler systems that function at optimal pressures between 0.5 bar to 3 bar pressure. Use a pressure reducer at the start of your irrigation system to regulate the pressure to the correct level.
Healthy Plants
Use barbed connectors to create a pipe network individually tailored to your garden layout. The connectors wide internal bore promises minimal flow disruption whilst the smooth internal diameter reduces friction loss. Use pipe stakes every metre to hold pipe securely in place with the option to cover with decorative bark.
Watertight Connection
The ergonomically shaped tapered edge allows pipe to easily slide onto the joiner and the protruding barb anchors it securely into place. Heat the end of the pipe in hot water for 10-30 seconds for easy installation. Use a ratchet clamp for extra security against pipe blow-off.
UV Resistant
Made from high-quality UV stabilised materials for long life and protection against deterioration when exposed to sunlight. The robust raw materials this connector is made from means it can easily withstand bar pressures required for low/high volume irrigation systems.
Please note: HydroSure barbed connectors are quoted using the internal diameter as connectors push inside the pipe however, the external diameter may also be printed on the fitting.
Specifications
Fits Internal Pipe Diameter: 16mm
Connection Type: Single Barbed
Maximum Bar Pressure: 3 bar
Thread: Female
Thread Size: 3/4"
Irrigation Fittings Frequently Asked Questions
My connector has a different size printed on the fitting – I have received the wrong product!
The external diameter is printed on the surface of a barbed and nut lock fitting however, compatible Drip Line, Soaker Hose and LDPE Pipe are quoted by their internal diameter. For easy identification of the compatible pipe, you will see our barbed and nut lock connectors listed with their internal diameter because connectors push inside the pipe. As barbed and nut lock connections must be tight to ensure a secure, watertight seal, we advise heating the pipe in boiling water before installation to make insertion easier.
What size connector does my irrigation supply pipe need?
Irrigation pipe is compatible with connectors the same size as the pipe’s internal diameter. For a more secure connection with minimal risk of pipe dislocation, use connectors 1mm larger than the internal diameter of your pipe to ensure a watertight seal.
How do I connect LDPE/drip line to a garden hose pipe?
The soft PVC structure of a garden hose is not compatible with barbed or nut lock fittings as these connectors require the rigid pipe structure of drip line or LDPE to lock onto. To connect drip line or LDPE pipe to a garden hose, connect a Barbed Director to a Quick Click Tap Connector by simply threading them together. Connect the LDPE pipe or drip line to the barbed outlet and install the Hose Pipe to the quick-click tap connector via a Hose End Connector.
Can barbed fittings be used with MDPE or HDPE pipes?
Yes, barbed fittings are ideal for sub-surface installation up to 15cm and are capable of withstanding bar pressures required for a small domestic underground sprinkler irrigation system. Top Tip: Before burying the system underground, install a Ratchet Clamp to secure each outlet and check each connection is watertight.
How to branch off micro pipe and micro dripline from irrigation pipe?
Please Note: Branching off a 4mm drip line from a 14mm or 18mm drip line should be avoided as piercing holes in the sidewall can impact the pre-determined output of emitters. Instead, branch off the micro drip line using LDPE as the header pipe
