HydroSure Barbed Fogger with Check Valve - Four Nozzle

An irrigation system within a greenhouse is essential as plants are not exposed to rainwater so are completely reliant on the grower. Manual watering is often a time-consuming task however, an overhead fogger system is ideal for an effective and inexpensive watering solution. Top Tip: For ultimate time-saving irrigation, install a Water Timer at the start of your system.

The in-built check valve opens when the system is turned on and pressure exceeds 1.7 bar and closes when the system is turned off and pressures reduce to below 1 bar. This essential mechanism prevents water droplets from falling onto plants and minimises the risk of leaf scorch caused by high temperatures within a greenhouse.

During the summer months, the temperature inside a greenhouse can rise to stifling levels that reduce growth and yield. Use HydroSure foggers to create an inexpensive greenhouse cooling/misting system that raises the humidity and reduces the temperature - the optimal conditions for plants to thrive.

Each fogger is capable of throwing water to a 2m x 2m perimeter. For uniform water distribution, space foggers 2 metres apart to ensure plenty of spray pattern overlap and minimise the risk of any dry spots resulting in under-watering.

Install directly into LDPE/Irrigation pipe installed overhead in a greenhouse. Use Support Hooks to secure pipe in position around the greenhouse perimeter and overhead. Pierce a 4mm hole in the pipe wall and simply push the barbed end of the dripper into the hole created. You should hear a pop when the fogger has been installed correctly.

Greenhouse fogger systems work most efficiently at water pressures around 1.7 - 3 bar. Often domestic water pressures will exceed the ideal bar pressure, so it is vital to use a pressure reducer at the start of your system to regulate the flow to the optimal level.