Product code
3073102550

HydroSure HDPE Sprinkler Pipe PE80 - 25mm x 50m - 10 Bar

41 In Stock
Install underground as part of a Pop-Up Sprinkler or Drip Line system. This mechanically strong pipe is made for strength, lasting performance and high flow capacity. See Full Description
£55.98 £46.65
(Ex. VAT) (Inc. VAT)
Price per Metre: £0.93 Price per Metre: £1.12

Install underground as part of a Pop-Up Sprinkler or Drip Line system. This mechanically strong pipe is made for strength, lasting performance and high flow capacity.

For tips on pipe compatibility, read our comprehensive guide.


Sprinkler Irrigation

This high-density polyethylene PE80 pipe (black with 4 blue stripes) fulfils the requirements from International certification ISO 9001/2015 for the design and production of PE pipes. Use generally for underground water transfer or in pressurised supply networks including applications such as garden irrigation, sprinkler irrigation systems or sub-surface cable protection.

Mechanically Strong Pipe

The 2.0mm wall thickness combined with a Standard Dimension Ratio of 13.6 means this quality pipe is designed for strength and the ability to withstand high pressures of up to 10 bar. Its robust construction to a Minimum Required Strength (MRS) of 8.0Mpa provides high tensile strength and reliability, making it extremely resistant to cracking caused by environmental stressors and mechanical pressures. 

Exceptional Quality Built to Last

The extrusion manufacturing process involves using high-quality thermoplastic to stabilise the pipe composition, ensuring reliable protection against bursting caused by sudden forces acting on the pipe wall, such as the opening/closing of a solenoid valve.
Through innovative technology, scanners and cameras provide extensive control over the production process resulting in automated control over the external diameter and wall thickness. This expert extrusion method creates a smooth internal wall designed to minimise pressure loss and enable exceptional flow capacity.

Compatible with Compression Fittings

HDPE 80 pipe is measured by its outer diameter and is compatible with 25mm Compression Fittings that fit the external diameter. Top Tip: Use a Chamfering Tool to blunt the edge of the pipe before installation to ensure a clean leading edge that will not cause damage to the internal mechanisms of the fitting.

Underground Pipe Installation

To install, excavate a trench equal to the pipe's diameter plus 20cm on either side. The excavation should be free from rocks and other objects. It is recommended to place a layer of sand 10-20cm deep at the bottom of the trench before installing the pipe. The material used to backfill the excavation should be free from rocks or sharp objects.


Please note: This pipe is non-potable and should not be used for WRAS-approved systems.


Specifications

  • MRS (Mpa): 8.0
  • Design Stress: 6.3
  • Wall Thickness: 2.0mm
  • Weight: 145 gr/m
  • External Diameter: 25mm
Product Specification
Product Code3073102550
Units Per Pack50
EAN00003073102550
ColourBlack
Length50m
Maximum Water Pressure10 Bar
Manufacturer's Guarantee1 Year
External Diameter1" / 25mm
Price Per Unit (Inc. VAT)1.12

Customers who bought this item also bought