HydroSure WRAS Approved Tee Compression with Female Thread Offtake - 32mm x 1" BSP
A Hydrosure WRAS Approved 32mm x 1” Female Tee Compression Fitting designed to split lengths of 32mm (external diameter) MDPE or HDPE WRAS approved pipe to threaded connections within a pipe run. This fitting is professionally engineered for use in potable water systems and in systems that require components to be WRAS approved. Please Note: You will require a pipe liner when using this fitting. Working Pressure up to 16 Bar.
Solutions that Work
For Top Tips on working with Compression Fittings, read our Compression Fitting Buyers Guide.
Water Tight Solutions
The compression fitting features an internal Clinching Ring that grips onto the pipe to ensure a reliable and water tight seal even at high pressures. It also has an additional Thrust Ring engineered for ultimate security and reliability against leaks. When the Nut is tightened, the Thrust Ring applies pressure on the Clinching Ring that pushes against the ‘O’ ring ensuring a water tight seal.Please Note: For threaded compression connectors, you will need to seal the connection/joint by wrapping PTFE tape at least twice around the male thread to ensure the fitting does not leak.
Easy to Use
Our Hydrosure Compression fittings are easy and fast to install. Simply place the Nut and Clinching ring onto the pipe and ensure the ‘O’ ring is fitted inside the fitting and free from any twists. Push the pipe into the compression fitting past the ‘O’ ring and against the pipe stop to ensure the pipe is fitted correctly. Slide the clinching ring up to the edge of the Pipe Body and twist the Nut onto the thread. To remove a compression fitting there is no need to cut the pipe, instead simply unscrew the Nut and remove the pipe from the main body of the fitting. The Clinching ring can then be prised open and placed back into the main body of the fitting.
Ultimate Durability
The fitting is constructed from high grade polypropylene polymers mechanically tested to comply for WRAS approval. The fitting has also passed the BS6920 taint test and microbiological testing for potable water. The ‘O’ ring is manufactured from anti-perishable strong and durable rubber to ensure a long-lasting water tight seal.
* WRAS approval is required for any water fitting which will receive and carry water from the public mains supply, these must comply with British regulations and Scottish Bylaws. This is a certificate to demonstrate that the product does not contaminate, waste and is “of an appropriate quality and standard” which satisfies the requirement of the regulations and bylaws.
Product Code | 20.41.2004.015 |
---|---|
EAN | 5055936490871 |
Material | Plastic |
Fits Pipe Size | 32mm Outer Diameter MDPE/HDPE Pipe |
BSP Thread Size | 1" BSP Female |
Connection Type | Threaded |
Internal Diameter of Fitting | 32mm |
Thread Type | Female Thread |
For Pipe Type | HDPE, MDPE |
Irrigation Fitting - Wras Approved | Yes |
Price Per Unit (Inc. VAT) | 3.12 |