HydroSure have developed this unique solution to effectively water your pot plants. The ergonomically shaped spike sits neatly over the edge of a pot for targeted watering directly towards the plant’s roots. It’s internal mechanisms create a slow flow designed to reduce soil ... See Full Description
HydroSure have developed this unique solution to effectively water your pot plants. The ergonomically shaped spike sits neatly over the edge of a pot for targeted watering directly towards the plant’s roots. It’s internal mechanisms create a slow flow designed to reduce soil erosion and water wastage from run off down the side of the pot. The built-in adjustable cap can be rotated by hand allowing you to shut off or alter the diameter of flow for complete control of water delivery easily modified to fit your plant’s consumption requirements.
Solutions that Work
For Top Tips on how to build a Stream Dripper Irrigation System tailored to your garden, read our Buyers Guide.
PotStream drippers are cleverly designed with a vertical 4mm inlet designed to direct micro-pipe discreetly down the side of a pot or planter for ultimate discretion and tidy irrigation systems. For larger pots and planters that require higher water consumption requirements, install multiple PotStream drippers around the edge by simply piercing a 4mm hole in the main supply pipe and installing a 4mm barbed joiner into the hole created. Then, attach a length of micro-pipe up to 4 metres long onto the end of the joiner sticking out of the supply pipe.
Ergonomically Shaped Spike
For complete stability, the built-in spike is constructed using an X-shaped design to provide maximum surface area and ultimate anchorage when in the ground. This prevents the stream dripper from moving in windy conditions ensuring more accurate delivery of water directly to the root zone.
Easy Clean Functionality
The cap can be twisted off to reveal the internal configurations of the stream dripper. This useful function allows you to clean any debris build-up that may have accumulated inside the dripper over time for easy maintenance promoting a longer-lasting system.
UV Protection
Manufactured from weather resilient high-grade poly-propylene and HDPE plastics with UV Additives resistant to high temperatures and most commonly used agricultural chemicals. Expertly constructed for long life and protection against deterioration even when subject to harsh climates and sunlight. Cheaper plastics will begin to deteriorate after time but you can be certain HydroSure stream drippers are built to last.
Optimal Performance
Adjustable stream drippers work most efficiently at water pressures around 1.0 -3.0 bar – use a pressure reducer at the start of your system to regulate the pressure to the optimal level.
Stream Drippers Frequently Asked Questions
How many Stream
Drippers do I need to water my garden?
Stream drippers produce a wetting pattern of up to 80cm in diameter. It is advisable to space the drippers apart so the wetting pattern from one dripper meets the location of where another is in situ. Example: A Stream Dripper producing a wetting pattern of 80cm should be spaced 40cm apart if installed in rows and lengthways in a linear pipe formation. This ensures wetting patterns overlap and eliminates the risk of dry spots/underwatering.
Some of my Stream Drippers are not working!
Common Problems
Stream Drippers not emitting: Check the flow rate from the tap using our Water Pressure and Flow Rate Guide. A flow rate of 540 LPH and a Stream Dripper output of 40 LPH means up to 13 emitters can be run in a single zone. (Flow Rate Divided by Emitter Output).
Dry spots: Emitters can become clogged with insects or dirt. Regularly flushing the pipe network, dismantling the drippers and cleaning them under running water prevents blockages.
Structural Damage: Digging in the garden can puncture the supply pipe affecting emitter performance. Locate leaks or water pooling and fix the pipe by cutting out the damaged section using Pipe Cutters and re-connect using a Joiner.
Pressure Loss: Make sure any open end of the pipe is plugged using an End Cap. This maintains water pressure at the correct level for emitters to function.
My Stream Drippers keep clogging and blocking!
Use an Irrigation Filter at the start of your system to prevent naturally occurring sediment from clogging dripper outlets.
Can I install Stream Drippers into a Hose Pipe?
No, hose pipe is manufactured from flexible PVC that when punctured to insert a Stream Dripper frays the surface and does not create a watertight seal.
Instead, insert Stream Drippers into the wall of Irrigation Pipe. LDPE Pipe has a rigid wall that a Stream Dripper can lock into. Alternatively, use alongside Micro Pipe for installations up to 10 metres away from the main supply.
Can I buy more Stream Drippers to extend my current system?
Yes, simply connect the additional pipe using a Barbed or Nut Lock Joiner. Alternatively, 4mm Joiners and Micro Pipe can be used to tap into the wall of the LDPE Pipe to take drippers up to 10 metres away from the main supply.
How do I hold irrigation pipe and Stream Drippers in position?
Properly uncoiling the irrigation pipe helps with installation. Make pipe easier to work with by weighing it down on either end with a brick and allow any bends to settle. The pipe can then be secured into place every metre and at either side of where a dripper is positioned using Pipe Stakes.
Mini Sprinklers vs Drip Line
Both Drippers and Drip Line regulate water flow based on the plant’s water consumption requirements. Whilst Drip Line is easier to set up, Stream Drippers enable flexible placement in flower beds, planters, hanging baskets and pots rather than being confined to the pre-set spacings of Drip Line.
Will a Stream Drip System
over winter or does it need to be removed?
HydroSure Stream Drippers are manufactured from high-quality polypropylene and silicone to ensure longer-lasting durability. For this reason, Drippers can remain in position over the winter months.
Top Tip: Avoid the impact of thawing and freezing by removing the End Caps or using a Valve in place of an end piece. Run water through the system for around 2 minutes to flush out any debris.
My Stream Drippers won’t stay in the irrigation tubing and
keep popping out!
Stream Drippers work best at pressures around 1.5 to 3 Bar. The water output from most garden taps usually exceeds this pressure causing dripper displacement from Micro Tubing or LDPE Pipe. Use a Pressure Reducer at the start of your system to regulate pressure to the correct level for drippers to function.
