HydroSure Micro Jet Winged Spray Head – Mist Pattern – 18 L/h - Pack of 50

Mist-patterned spray jets are simple to install and easily assembled in a greenhouse watering system or hanging basket. Create a network of LDPE/Irrigation pipeline above where you want to water, hand thread the mist sprayer directly into the top of a Rigid Riser and install the riser upside-down directly into LDPE pipe by creating a 4mm hole using a Key Punch. Water will emit from the sprayer as a mist and dewdrop gently over plants creating a micro-climate.

Micro sprays are the ultimate time-saving solution compared with their underground watering counterparts yet still ensure a complete garden watering solution. A micro spray system can be quickly installed no matter how complicated your garden layout and unlike more permanent irrigation systems can be easily adapted or expanded if you change your garden design.

Each winged micro spray head features a built-in snap ring that holds the cap of the sprayer in place. The snap ring allows for the cap to be removed and reassembled from the spray body using a Hydrosure Key Punch. This unique design provides the perfect solution when debris or insects distort the spray pattern and block the sprayer outlet. The cap and base can be cleaned in a bucket of water and reassembled to ensure optimal coverage and the correct spray pattern is emitted.

Micro sprays can be used within an automatic watering system so you no longer have to spend time watering your garden - you don’t even need to remember to turn on the tap. Instead, install any Water Tap Timer that suits your budget and set it to the times and frequency you would like to water. Using an automated system not only means you save time for other activities but, also means plants can continue to thrive even when you go on holiday.

Manufactured from UV-stabilised materials for long life and protection against deterioration when in use and exposed to sunlight. Cheaper plastics will begin to fade and crack but you can be certain Hydrosure micro spray heads are built to last.

Mist pattern micro spray heads work best at water pressures around 1 – 2.5 bar. At this water pressure, they produce 18 L/h at 1 bar and 28 L/h at 2.5 bar with the ability to throw water to a diameter of up to 1m (depending on the pressure available). The water pressure from your tap usually exceeds the required pressure for a micro spray system to function optimally. Use a Pressure Reducer at the start of your system to regulate the pressure to the correct level.