HydroSure Essential 4mm Barbed Micro Mixed Fittings Pack - Small

Name: HydroSure Essential 4mm Barbed Micro Mixed Fittings Pack - Small
Brand: HydroSure
SKU: 41485HS
Price: 7.2 GBP
Availability: InStock

Build a micro irrigation pipe network using these 4mm connectors fully compatible with 4mm Micro Pipe and See Full Description

Product Description

Build a micro irrigation pipe network using these 4mm connectors fully compatible with 4mm Micro Pipe and Micro Drip Line. Arrives complete with tee and elbow connectors, joiners, goof plugs & a multi-tool.

Use these connectors with 4mm Micro Pipe or 4mm Drip Line

For Top Tips on how to set up a garden watering system, read our Buyers Guide.

Barbed Connectors Guide

Compatible Pipe & Connectors

Pack Contains

20 x HydroSure Goof Plugs or End Plugs

Seal 4mm holes made in the wrong place or when your system needs to be changed.
Use as an end cap to plug the end of 4mm Micro Pipe or 4mm Drip Line.

1 x HydroSure Multi-Tool and Hole Punch

The multi-tool has three useful functions!
Pierce 4mm holes in the wall of LDPE Supply Pipe
Remove the caps of Winged Micro Spray Heads for essential cleaning
Place a barbed joiner included with this kit into the hexagonal core and use this to assist when pushing the joiner into a 4mm hole

10 x HydroSure 4mm Joiners

The perfect solution when branching off Micro Pipe from LDPE Supply Pipe! Simply use the HydroSure Multi-Tool included with this kit to pierce a hole and insert the connector into the sidewall. This setup enables the installation of Micro-Emitters up to 10 metres away!

6 x HydroSure 4mm Elbow Connectors

Ideal for keeping pipe tidy when navigating it up the side of pots or around corners. Use alongside a Micro Pipe Stake to secure in position.

10 x HydroSure 4mm Tee Connectors

Branch off Micro Pipe in multiple directions or use to create a circle of Drip Line around the base of a pot or planter.

Product Features

Solutions that Work

Complete with all the tools and connectors required to build a network of 4mm pipe! This essential kit promotes ultimate flexibility when branching off emitters or navigating a network of Micro Pipe or Dripline. Please Note: 4mm pipe should only be run in 10-metre lengths due to extra friction in smaller pipes which may hinder water flow and efficiency after this length.

Watertight Connection

Each barbed connector features an ergonomically shaped tapered edge that allows pipe to easily slide onto the connector whilst the protruding barb anchors it securely into place. Heat the end of the pipe in hot water for 10-30 seconds for easy installation.

Build an Irrigation System

Ideal for use in micro-irrigation/emitter systems that function at optimal pressures between 0.5 bar to 3 bar, such as Micro Drip, Micro-Sprinkler and Micro-Spray systems. Use a Pressure Reducer at the start of your irrigation system to regulate pressure to the correct level.

UV Resistant

Made from high-quality UV-stabilised materials for long life and protection against deterioration when exposed to sunlight. Each connector is made from robust raw materials meaning it can easily withstand bar pressures required for low/high volume irrigation systems.

Product Specification